เครื่องรีไซเคิลโซเว้นท์รุ่น T - 80 solvent recovery machine
Feeding capacity: 80 liters
Electric Voltage: 220V/380V/5KW
Size: 1160X870X1260mm
Net weight: 200 kg
T Series solvent recovery machine has the following
advantages:
- Machine
and components using explosion-proof safety design, products are qualified
products by China National Supervision and Inspection Center explosion:
Explosion-proof mark: ExdeIIBT3 / T4
- Intelligent
PID, PLC digital control system
Autonomous and independent research of PID, PLC control system, one of the most advanced operating control systems, automatically digital display control. Precise control of the temperature heating. Multi-program control can be set up for recycling different solvents, automatic production equipment without special care. - Specially
designed electronic control box
Characteristics of explosion-proof operation mechanism, the security parameter can be set up without opening the control box, it is suitable for operating in an explosive-proof atmosphere! (in the course of running, the electric control box is prohibited to open under any circumstances) - Independent
seal design
The sealing ring of the solvent recovery machine is produced independently-molding, which ensures that the solvent gas solvent does not cause leakage and risk. Under normal operation, the washer is guaranteed for one year - Body
and recycling bins and temperature control
Barrel made of stainless steel, double-layer structure, indirect heating, reinforced lid design, precise 32 stages of temperature control, heating, steam recovery time digital display, explosion-proof, leak-proof, all-stainless steel body, easy to clean and maintain. - Vacuum
decompression recovery function (optional)
Standard vacuum pressure (pump) devices, heating, condensation, decompression, storage, combination of a variety of functions, the heating temperature is low, saving heating electricity; closed recycling, reduce volatile, prevent leakage; superior efficacy for recovery of volatile, decomposition, toxic and high boiling point solvent. - Automatic
feeding (optional):
Automatic feeding or manual control automatic feeding, without opening the cover; slag without opening the lid, after the recovery, automatic shutdown or remote delivery workplace, high efficiency, low solvent evaporation, low labor intensity. - Temperature-setting
shutdown function
Temperature set, when the solvent has been done or the sensing temperature probe cannot feel the vapor, the device will automatically shut down, digital induction, high accuracy, can set a low 5-10 degrees off. - Time
off function:
The recovery time of the machine is set in advance, the operation time reaches the preset one, the device will stop the heating system. When the fan continues to run about 20 minutes, the machine will automatically stop. This function is to prepare for when there is residual vapor within the barrel, the steam from the pipe will run out causing safety problems if the power is cut off. - Ultra
high temperature protection function:
Preset heating maximum temperature, when the temperature of the heat medium oil reaches the highest temperature, the high temperature protection red light will be on, the heater stops heating. This function is to ensure that the machine safely runs in the setting temperature range, to prevent the heating temperature is too high. - Ultra
high voltage protection function:
If pipes are clogged, the steam cannot discharge, when the barrel pressure exceeds 3kg, the safety valve on the lid will automatically open to relieve pressure, to ensure the safety of equipment and personnel. - Temperature
control system damage protection function:
During the operation of the machine, if the temperature control instrument is damaged, or sensing wire breaks down, the device will automatically stop working. When the recovery starts again, the device will not run to avoid solvent completely evaporating or accident due to the continuous heating. - Anti
drying-out function: (optional)
The unique steam upper limit shutdown, and 5%-10% of solvent can be set aside, so that the solvent cannot be dried out completely, and the residue can be conveniently cleaned.
Optional features: You can choose a variety of functions and
combine your needs rationally in order to achieve the desired treatment effect.
There are air-cooling, water-cooling, under slagging, dumping type, vacuum
decompression pump, automatic feeding, continuous feeding type, etc. If you
have any questions, please feel free to contact us, thank you!